Scanditron Sverige AB

M2-900 is the new laser marker from ELECTRO DESIGN.

Electro Design board handling

Automation Products for the Electronics Industry Electro Design is designing and manufacturing automation products to the electronics industry. Since the first conveyor was made in the year 1987 we have delivered approximately 5000 units to customers all over the world. We have a full product range for SMT lines, Conformal Coating lines, Selective and Wave Soldering lines, AOI Inspection Lines/ Cells and special applications. We are located in Sweden, member of the European Union (EU) near Stockholm, the capital of Sweden and only 80 km from the international airport Stockholm-Arlanda

Schleuniger Cut & Strip Family E300

The Cut & Strip Family E300 cut and strip machine impresses with high performance, optimized operability and outstanding process reliability. It processes wires, tubing, ribbon and multiconductor cables as well as insulation such as PVC, PUR or Teflon in high-precision quality. Standard applications include the stripping of the outer jacket in several steps, as well as full and partial strips – also on both sides – with conductor cross sections from 0.05 to 10 mm² (36 to 8 AWG) and cable diameters from 0.3 mm to 8.0 mm (0.012" to 0.31"). Different belt materials and the included short piece kit allow a wide range of applications. Blades and guides of the predecessor model EcoStrip 9380 are compatible. The contact pressure on the feeding unit is programmable. This allows for very fine and targeted adjustments. The E300 is equipped with a two-in-one quick-change feeding unit suitable for roller drives, including a short piece kit for the processing of short cables. On the E300, changing the feeding unit to the short piece kit is software assisted. The gripping axis is programmable and ensures accurate transport of the cable. The intuitive interface of the S.Drive software facilitates the creation of jobs and article programs, and increases overall performance. Predefined and verified default parameters support quick creation of processing jobs.

Schleuniger Strip Series B240

The Strip Series B240 is a programmable strip machine for the stepped processing of coaxial cables as well as the processing of multiconductor and single-conductor cables. Equipped with two rotary blades, it processes simple stranded wires and multiconductor cables with a cross section from 0.013 to 13 mm² (36 to 6 A WG) and a diameter of up to 9 mm (0.35”), thus achieving a strip length of 39 mm (3.15”) and a pull-off length of 40 mm (1.57”). Even challenging materials such as PUR, PVC, rubber, Teflon®, Tefzel® or textile glass braiding can be stripped cleanly and reliably thanks to the cutter head’s high-resolution movement axes. The B240 also processes micro-coaxial cables with a diameter of up to 0.8 mm (0.02”) without the need for changeovers. Repeat accuracy, mechanical precision and short work cycles ensure high productivity. The blades and universal clamp jaws on the B240 can be used across the entire range of cable processing applications – machine downtimes due to changeovers are eliminated. The focus on ergonomic operation and programming via a 5" color touch screen with good accessibility further increase productivity. The B240 is quick to deploy and is particularly easy to operate without programming knowledge thanks to its state-of-the-art, intuitive software interface.

Schleuniger Strip Series B340

The Strip Series B340 stripping machine boasts a wide range of performance. Equipped with four rotary X-shaped blades, it processes simple stranded wires and multiconductor cables with a cross section from 0.013 to 16 mm² (36 – 5 AWG) and a diameter of up to 9 mm (0.35”), thus achieving a strip length of 80 mm (3.15”) and a pull-off length of 40 mm (1.57”). Repeat accuracy, mechanical precision and short work cycles ensure high productivity. The blades and universal clamping jaws on the B340 can be used across the entire range of cable processing applications – machine downtimes due to changeovers are eliminated. The focus on ergonomic operation and programming via a 5" color touch screen with good accessibility further increase productivity. The B340 is quick to deploy and is extremely easy to operate without programming knowledge thanks to its state-of-the-art, user-friendly software interface.

Schleuniger Strip Series B300

In its price class, the portable B300 stripping machine opens up completely new possibilities for fast and at the same time reliable stripping of cables with cross sections from 0.03 to 8 mm2 (32 to 8 AWG). The ergonomic machine design and the completely revised user interface on the high-resolution 5” color touchscreen offer unrivaled ease of use. The B300 is extremely ease to operate, even without programming knowledge. Simplified input screen content and the guided menu navigation make for intuitive handling. Process parameters stored in the software allow out-of-the-box use for the common functions of stripping with full and partial pull-off and recutting. More complex applications, the storing of articles, or a customer-specific process parameterization can be achieved with the optional software upgrade. The repeat accuracy, mechanical precision and short work cycles ensure high productivity in common stripping applications.

KOMAX Mira 340

The programmable Mira 340 and 340 Q are designed for universal use while maintaining maximum precision. They are perfect for processing wires and insulation material with demanding requirements. The rotary head with 4X blades offers unique functions designed to reduce production time and increase quality. The patented ACD incision monitoring avoids conductor damage and complies with requirements in the automotive or aerospace industry. As a result, a single machine can be used for a huge range of applications. Thanks to sequential processing, multi-conductor cables and multi-layer insulation materials can be processed quickly, thereby saving time. Meanwhile, its ease of use also increases productivity.

Inovaxe Smart Storage Solutions

With Inovaxe’s Smart Storage Solutions you can store hundreds of reels per square foot and access your parts in seconds. Each smart location is configured to perfectly fit a desired reel size, allowing you to utilize every cubic inch without any wasted space. Our smart reel storage solutions detect when reels are added or removed, and light up required parts for retrieval using sensors and LEDs found at every location. One controller unit can operate multiple carts or racks, allowing you to expand and increase capacity over time. Flexible and easy-to-use, our innovative software can be linked with any third part system like an MES or ERP system. Inovaxe allows you to: Retrieve reels in less than 4 seconds Return reels in less than 8 seconds Reduce kitting time from hours to minutes ROI in 3 – 6 months Our reel storage carts and racks are Wi-Fi ready on a Windows 10 platform and can be configured for storage of reels 7”–15” in diameter and 8-56mm in width.

MYC50 conformal coater

High-performance conformal coating As electronics continually become embedded into an endless variety of products, the need for high-precision conformal coating is greater than ever before. Automate complex coating processes, monitor process parameters and switch spray patterns without interruption. The MYC50 gives you powerful, software driven process flows that ensure years of productivity for even the most complex printed circuit boards. The MYSmart series MYC50 in-line conformal coating platform combines high-accuracy edge definition with advanced feedback systems. A wide range of process parameters can be monitored enabling high quality output. Options such as fan width control, flow monitoring, heated fluid systems and barcode readers are a few examples of process control enhancements that are possible. Wherever ruggedized electronics are required, the MYC50 helps to prevent material waste while ensuring highly controlled coating film thickness, coating area and process speed.

ZOLLER + FRÖHLICH Stripper AI 01

The basic model AI 01 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle. In addition a special funnel to infeed a thin wire is also delivered.

Modular stripper crimper Z+F EVOCRIMP

The Z+F EVOCRIMP is an electric stripper-crimper for insulated ferrules. This machine allows the universal and reliable processing of Z+F ferrules from 0.5 up to 2.5 mm² (AWG 20 – 14). The compact and reliable design fits into the „EVO-Line“.

Universal stripper-crimper UNIC-GV

The UNIC-GV is an electropneumatic benchtop stripper-crimper, which allows the processing of five ferrules on reel with different cross sections. Ferrules on reel in the range from 0.5mm2 to 2.5 mm² (AWG 20 – 14) with crimping lengths of 8 mm or 10 mm can be processed with no down time. The user simply chooses the cross-section on a touch display. Ferrules on reel for multi standard conductors can also be processed.

Scanditron Stencil E-CABINET

• innovative in every detail • 288 stencils, one cabinet • only 0.75 square meters • LED lighting • comprehensive stencil tracking • three variants • configuration takes 10 minutes • operated via a touchscreen and scanner

CompControl - WEControl incoming goods scanner

Highlights of the WEControl incoming goods scanner The system captures the incoming goods of all containers in a transparent and automatic way through the camera. It completely captures and analyses the barcode and plain text information on the containers. It automatically posts the incoming goods in the ERP system

FUJI NEXIM Software

Nexim issues instructions for checking out parts and performing changeover based on these created schedules, as well as instructions for part resupply based on the machine operating conditions. In Nexim, production processes are connected through the system to control production, making FUJI Smart Factory a reality.

Electro design new UV LED

New UV LED curing tunnel from Electro Design. footprint only 0.6 Meter

Fixtures, solder frames, coating frames etc.

Selective soldering frames, Conformal coating frames, Pressfit support... more or less any kind of frame, fixture, pallet, tray to be used in production. CI electronics design and produce top class products.

Scanditron Products

Best in class stencil cleaning rolls, stencil wipes, IPA wipes, ECO cleaning rolls, etc..

EKRA 6000

Autonomy to Infinity The SERIO 6000 is the first fully automatic printer worldwide. The system offers automation in stages - adaptable to the automation level of the existing production. With the smart autonomous printer, squeegees and stencils can be set up asynchronously, for example. Specific tools for the next product cycle can be stored directly on the printer and then automatically installed at the right time. Set-up can be done manually by an operator or autonomously via a Cobot. The SERIO 6000 is capable of operating over several shifts without significant operator intervention. Discover the autonomous printer - adapted to your needs and easily integrated into your autonomous line or production.