Rohde & Schwarz Sverige AB

R&S®Scope Rider Handheld Digital Oscilloscope

When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device. Key Facts - 60 MHz to 500 MHz with 5 Gsample/s sampling rate - Isolated channels with CAT IV 600 V / CAT III 1000 V rating - 10-bit ADC - 50 000 waveforms per second - Capacitive touch and keypad operation - 8 in 1: Lab performance oscilloscope, logic analyzer, protocol analyzer, data logger, digital multimeter, spectrum analyzer, harmonics analyzer and frequency counter - IP51 housing meeting military environmental requirements - Wireless LAN and Ethernet for web-based remote control and quick data access

R&S®ZNB Vector Network Analyzer

Leading in speed, dynamic range and ease of operation. Frequency ranges from 9 kHz to 40 GHz More than 60 years of experience in the field of vector network analysis pay off: Rohde & Schwarz sets new benchmarks with its R&S®ZNB family of vector network analyzers. These analyzers feature high measurement speed, outstanding precision and exceptional ease of operation. Key Facts - Frequency range from 9 kHz up to 40 GHz - Wide dynamic range of up to 140 dB - Short sweep times, e.g. 4 ms for 401 points - High temperature stability of typ. 0.01 dB/°C - Wide power sweep range of 98 dB - Wide range of IF bandwidths from 1 Hz to 10 MHz - Manual and automatic calibration - Large, high-resolution 12.1" screen - Touchscreen user interface - Two or four ports - Four-port model with two independant generators - Expansion to up to 48 ports using switch matrices

R&S®ZND Vector Network Analyzers

Basic, solid-performance network analysis The R&S®ZND is a basic network analyzer that provides unidirectional measurements up to 4.5 GHz. Options are available to perform bidirectional measurements and to extend the frequency range to 8.5 GHz. Key Facts - Two-port network analyzer for unidirectional measurements from 100 kHz to 4.5 GHz - Frequency range can be extended to 8.5 GHz - Test set can be enhanced for bidirectional measurements - Touchscreen operation - Dynamic range up to 120 dB - Power sweep range up to 48 dB - Bandwidths from 1 Hz to 300 kHz - More than 100 traces and channels - Compatible with all Rohde & Schwarz network analyzers

R&S®Cable Rider ZPH Cable & Antenna Analyzer

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements. The easy-to-use analyzer features a touchscreen and large keypad. Key Facts - Frequency range from 2 MHz to 3 GHz/4 GHz, upgrade via keycode - DTF, return loss, VSWR and one-port cable loss measurements - Ideal for field use: 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51) - Large color touchscreen - Measurement wizard to speed up measurements and eliminate human errors - Easy and cost-efficient upgrades of all options via software keycode

R&S®FSH Handheld Spectrum Analyzer

The R&S®FSH spectrum analyzer is rugged, handy and designed for use in the field. Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work. The R&S®FSH is a handheld spectrum analyzer and – depending on the model and the options installed – a power meter, a cable and antenna tester and a two-port vector network analyzer. It provides the three most important RF analysis functions that an RF service technician or an installation and maintenance team needs to solve daily routine measurement tasks. For example, it can be used for maintaining or installing transmitter systems, checking cables and antennas, assessing signal quality in broadcasting, radiocommunications and service, measuring electric field strength or in simple lab applications. The R&S®FSH can perform any of these tasks quickly, reliably and with high measurement accuracy. Key Facts - Frequency range from 9 kHz to 3.6/8/13.6/20 GHz - High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz)) - 20 MHz demodulation bandwidth for analyzing LTE signals - Low measurement uncertainty (< 1 dB) - Measurement functions for all important measurement tasks related to the startup and maintenance of transmitter systems - Internal tracking generator and VSWR bridge with built-in DC voltage supply (bias) - Two-port network analyzer - Rugged, splash-proof housing for rough work in the field - Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys - Easy operation thanks to user configurable, automatic test sequences (wizard)

R&S®Spectrum Rider FPH Handheld Spectrum Analyzer

The R&S®Spectrum Rider FPH is a versatile, user-friendly instrument in a rugged and appealing design. The frequency range of the basic analyzer is 5 kHz to 2 GHz. The upper frequency limit can easily be extended to 3 GHz or 4 GHz via keycode. Key Facts - Frequency ranges from 5 kHz to 2/3/4 GHz; upgrade via keycode - Solid RF performance - Ideal for field use: 8 hour battery life, 2.5 kg (5.5 lb) weight, backlit keypad, fast boot time, nonreflective display, small footprint, ruggedized housing - Large color display with touch and gesture operation - Measurement wizard that supports measurement campaigns speeds up measurements and avoids errors - Features and options for various industries such as aerospace and defense, wireless communications, broadcasting, spectrum regulators and education - Easy and cost-efficient upgrades of all options via software keycode - Three-year warranty as standard (battery one year)

R&S®FSW Signal and Spectrum Analyzer

Setting standards in RF performance and usability The high-performance R&S®FSW signal and spectrum analyzer was developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy. Key Facts - Frequency range from 2 Hz to 8/13.6/26.5/43.5/50/67/85 GHz (with external harmonic mixers from Rohde & Schwarz up to 500 GHz) - Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier) - –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements - Up to 2 GHz analysis bandwidth - < 0.4 dB total measurement uncertainty up to 8 GHz - Real-time analysis up to 512 MHz bandwidth - High-resolution 12.1" (31 cm) touchscreen for convenient operation - Multiple measurement applications can be run and displayed in parallel

R&S®SMW200A Vector Signal Generator

New: Up to 2 GHz internal modulation bandwidth The R&S®SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality. The R&S®SMW200A is the ideal generator for digitally modulated signals required for the development of new wideband communications systems, the verification of 3G and 4G base stations or in the aerospace and defense sector. The I/Q modulation bandwidth of up to 2 GHz with internal baseband satisfies fourth- and fifth-generation standards (e.g. 5G, LTE-Advanced and IEEE 802.11ac/ad), and the R&S®SMW200A is designed to meet future requirements. Its modular scalable architecture allows users to optimize the generator to their applications and to upgrade it as required. A second RF path can be added, as well as a maximum of two baseband and four fading simulator modules – without compromising on signal quality. As a result, the R&S®SMW200A can create signal scenarios that previously required multiple instruments or could not be implemented at all. From MIMO up to 8x2 and LTE-Advanced carrier aggregation including fading to multistandard radio – never before has an instrument offered such high-class signal generation capability. If more than two RF paths are required, additional R&S®SGMA signal generator modules can be connected. The intuitive, touchscreen-based operating concept provides the user with an overview of measurements, no matter how complex, and quickly delivers the desired results. Key Facts - Frequency range from 100 kHz to 3 GHz, 6 GHz, 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz - Optional second RF path with 100 kHz up to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz - Versatile configuration: from single-path vector signal generator to multichannel MIMO receiver tester - Ideal for MIMO, MSR or LTE-Advanced applications thanks to up to eight signal sources and up to 32 fading channels - Modular architecture for optimal adaptation to the application at hand

R&S®CMW Platform

Wideband Radio Communication Tester The R&S®CMW500 - Production Test is the universal tester for testing the air interface of wireless devices. The R&S®CMW500 - Production Test can be used in all phases of product development and production and supports all common cellular and non-cellular wireless technologies. Key Facts All-in-one test platform for wireless devices - Wireless standards and broadcast technologies, e.g. LTE (incl. MIMO), WLAN or DVB-T and associated inter-RAT messages - All phases of development, verification and production - All protocol layers, from RF tests and protocol tests to end-to-end application tests Modular and flexible hardware - No need for external RF switches due to configurable, MIMO-capable RF frontend for flexible connection with wireless devices - Fully automatic path correction versus frequency/time/temperature for top measurement accuracy, plus two-year calibration interval Application-tailored software - Vector signal analyzer and generator - Realtime RRC network emulation and protocol stacks - U-plane data support for end-to-end performance tests

HMC8012 Digital Multimeter

Key Facts - Measurement range: DC to 100 kHz - Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F - Basic accuracy: 0.015 % (DC) - 5¾-digit display (480 000 counts) - Simultaneous display of three measurement functions, e.g. DC + AC + statistics - Measurement rate: up to 200 values/s - Measurement functions: V (DC), I (DC), V (AC), I (AC), frequency, DC power, resistance (two and fourwire), temperature (PT100/PT500/PT1000), capacitance, diode and continuity test - Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm - Data logging to internal memory or USB flash drive in CSV format - Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB) - SCPI commands largely compatible with Agilent 34410A (HMC8012-G) - HMC8012-G: HMC8012 incl. IEEE-488 (GPIB) interface

R&S®RTO6 oscilloscope

Key facts 6 GHz maximum bandwidth 1 million waveforms per second 9.4 ENOB for ultimate signal integrity 2 Gpoints maximum memory Exclusive frequency zone trigger The oscilloscope you can trust The R&S®RTO6 is the oscilloscope you can trust. Engineered to deliver reliable results, it acts as a sophisticated laboratory companion to solve measurement problems fast and keep you on schedule. The R&S®RTO6 oscilloscope series leverages the engineer’s expertise and builds your measurement confidence by achieving deep insights, whenever needed. The R&S®RTO6 oscilloscope series provides superior signals to insight for your applications. The large 15.6' touchscreen and a new GUI, combined with high waveform update rate, excellent signal fidelity, digital trigger and deep responsive memory serve as a fully integrated test solution for frequency, protocol and logic analysis. The R&S®RTO6 oscilloscope series’ rich measurement toolset combined with a streamlined user interface helps you quickly solve circuit issues from simple to complex.

R&S®RTM3000 oscilloscope

Key facts: Bandwidth: 100 MHz to 1GHz Sample rate: up to 5 Gsample/s Memory depth: up to 80 Msample ADC resolution: 10-bit Display: 10.1’’ capacitive touchscreen See more of your signal with the power of 10 Designed as daily problem-solving tool, the R&S®RTM3000 combines the power of ten (10-bit ADC, 10 times the memory and 10.1' touchscreen) with a Rohde & Schwarz probe interface for all Rohde & Schwarz probes. Four times more vertical resolution than standard 8-bit ADCs Maintains fast sampling rates at all times 10.1' touchscreen with gesture support

R&S®RTP Oscilloscope

Key facts Bandwidth: 4 GHz to 16 GHz Max. sample rate: 40 Gsample/s Max. memory depth: 3 Gpoints per channel Up to 16 bit resolution All trigger events at full bandwidth Promo oscilloscopes10 years oscilloscopes3 year warranty extensionMulti-domain iconHD 16 bit Signal integrity in real time The R&S®RTP high-performance oscilloscope combines high-class signal integrity with a fast acquisition rate. Customized frontend ASIC and real-time processing hardware enable highly accurate measurements with unprecedented speed in a compact form factor. 750,000 waveforms/s to find faults fast High-precision digital trigger with no bandwidth limitations Real-time deembedding for triggering and fast acquisition Compact design and silent operation to best fit any lab Precise measurements with flat frequency response of +/- 0.25 dB

R&S®SMBV100B vector signal generator

Perfect combination of performance and usability Key facts Frequency range from 8 kHz to 3 GHz or 6 GHz Ultra high output power up to +33 dBm 1 GHz modulation bandwidth with perfect accuracy Signal generation for all major digital communications standards incl. 5G NR, LTE and WLAN GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS Perfect solution for mobile communications, GNSS and other applications The state-of-the-art R&S®SMBV100B vector signal generator sets standards for its class. Ultra high output power, fully calibrated wideband signal generation and intuitive touchscreen operation make the R&S®SMBV100B ideal for all kinds of applications. Always in line with the latest major digital communications standard specifications, such as 5G NR, LTE and WLAN, the SMBV100B is the preferred test solution for receiver and component characterization. The R&S®SMBV100B can come with many GNSS options, transforming the instrument into a reliable, full-featured GNSS simulator. The advanced simulation capabilities enable realistic and complex yet repeatable GNSS scenarios to be run under controlled conditions.

R&S®NGL200 power supply series

A specialty power supply from R&S Essentials Key facts Max. output power: 120 W Voltage per channel: 0 V to 20 V Max. current per channel: 6 A Load recovery time: < 30 µs Intuitive, price-transparent online product configurator High precision source and sink Due to high accuracy and fast load recovery time, the R&S®NGL200 DC power supply series is perfect for challenging applications, such as: - battery tests - power consumption test - simulation of voltage drops - supplying sensitive designs Their two-quadrant architecture allows R&S®NGL200 to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable these DC power supplies to handle fast load changes that occur for example when mobile communications devices switch from sleep mode to transmit mode. Choosing the R&S®NGL200 has never been easier: with our new online configurator you can choose the DC power supply and options you need with full price transparency. Send a purchase request directly to the authorized Rohde & Schwarz distribution partner of your choice. Discover it for yourself, click 'configure and quote'.

R&S®ZNA vector network analyzers

Key facts 10 MHz to 26.5/43.5/50/67 GHz (R&S®ZNA26/43/50/67) Two or four port models available Excellent RF-performance Up to four integrated sources Unique and intuitive touch-only operation Masters the most challenging measurement tasks The R&S®ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the R&S®ZNA to a powerful, universal and compact measurement system for characterizing both, passive and active devices.

R&S®CMX500 5G One-Box Signaling Tester

Key facts LTE, 5G FR1 frequency range up to 8 GHz and FR2 milimeter-wave frequency range up to 50 GHz in one instrument Support of 5G stand-alone mode / non-stand-alone mode Capable of large variety of present and future LTE and 5G 3GPP band combinations Future proof modular and scalable HW-architecture Web-based CMsquares user interface for RF-, functional-, application- and protocol test The next generation of mobile radio testing The R&S®CMX500 radio communication tester is the future-proof solution for 5G NR testing, featuring an intuitive and flexible web-based user interface, the R&S®CMsquares. Supporting manual interactive operation as well as automatically sequence-controlled test protocols makes the R&S®CMsquares an advantageous software solution, with unique modules for all signaling use cases. These range from R&D design stages up to end-to-end application testing, production and conformance tests. The introduction of a one-platform strategy for all 5G NR test equipment enables a unified test environment for signaling and non-signaling testing through all stages of 5G device production.

R&S®ZNL vector network analyzer

Key facts Wide frequency range from 5 kHz up to 20 GHz Optional spectrum analysis and power sensor support up to 6 GHz CW signal generator spectrum analysis option Cost-efficient, portable (battery-powered option), precise, versatile The 3-in-1 allrounder Portable network analyzer, optional spectrum analyzer (with independent CW source) and power sensor support The R&S®ZNL helps reduce investment costs with a unique option concept. The base models support frequencies from 5 kHz to 20 GHz and the models up to 6 GHz can be expanded to include a fully integrated spectrum analyzer and support RF power meters. Furthermore, spectrum analysis supports a CW signal generator option. Instead of investing in multiple instruments, research labs, service centers, universities and production facilities can use a single, compact instrument that offers even higher measurement speeds and better RF performance than dedicated instruments in comparable classes.

R&S®FPL1000 spectrum analyzer

Experience high performance wherever you take it Key facts Frequency range 5 kHz to 26.5 GHz SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz Lightweight with small footprint 40 MHz analysis bandwidth (option) Brief description In an RF lab, the R&S®FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.

R&S®FSWP Phase noise analyzer and VCO tester

High‑end analysis of signal sources and components Key facts High end signal and spectrum analyzer and phase noise tester in one box Very high sensitivity for phase noise measurements even on pulsed signals through cross correlation with unrivaled performance close to carrier Frequency range from 1 MHz up to 50 GHz, 500 GHz with external mixers Internal source for measuring residual phase noise, also on pulsed signals Simultaneous measurement of phase noise and amplitude noise Unrivaled low phase noise The R&S®FSWP phase noise analyzer and VCO tester features very high sensitivity thanks to extremely low-noise internal sources and cross-correlation. It can measure phase noise and amplitude noise in mere seconds on highly stable sources such as those in radar applications. Additional options such as pulsed signal measurements, residual phase noise (including pulsed) characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument.

R&S®BBA130 broadband amplifier

The first tunable amplifier for a wide range of applications Key facts Frequency range between 80 MHz and 6 GHz Output power between 22 W and 13000 W Adjustable in bias point and mismatch tolerance Suitable for amplitude, frequency, phase, pulse and OFDM modulation Flexibly scalable and upgradable in frequency and power The R&S®BBA130 broadband amplifiers provide RF output power between 22 W and 13000 W over the frequency range between 80 MHz and 6 GHz. The robust amplifiers offer flexible setting options so that an optimal RF signal can be generated for the specific application. It is therefore possible during operation to adjust the bias point for the transistors between Class A and Class AB and to change the mismatch tolerance at the output to provide more power. The air cooled amplifiers have a compact, modular design and are suitable as desktop models or can be installed in a rack. Its upgradability in frequency and power safeguards customers" investment.

R&S®LCX LCR meter

The top-class in component testing Key facts Frequency range upgradeable to 10 MHz Basic accuracy of ±0.05 % for impedance measurements Basic accuracy of ±0.03° for phase measurements DC bias up to 40 V Data logging function The top-class in component testing The R&S®LCX LCR meters are versatile, extremely accurate and perform measurements quickly. They are ideal for challenging applications in research, development and production. Two instrument models and various options cover applications with a test signal frequency of up to 10 MHz. Internal and external bias functions, comprehensive analysis options and versatile test fixtures expand the wide range of possible applications.

R&S®NGP800 Power supply series

A performance power supply from R&S Essentials Key facts Max. output power: 800 W Max. voltage per channel: 32 V or 64 V Max. current per channel: 10 A or 20 A Up to 250 V or 80 A in series or parallel operation Intuitive, price-transparent online product configurator Boost your efficiency with quadcore power The R&S®NGP800 DC power supply series, comprising of five models with 400 W or 800 W, provides maximum power at a variety of operating points. The two or four 200 W outputs can each supply up to 64 V or up to 20 A. Electrically equivalent and galvanically isolated outputs can be wired in series or parallel for up to 250 V or 80 A. The R&S®NGP800 DC power supply series is ideal for a variety of T&M scenarios: automotive, R&D, manufacturing and general purpose use. Configure your R&S®NGP800 with our online configurator tool for: - full price transparency - ease of configuration - fast processing of your request and purchase from authorized distributor of your choice Click 'configure and quote' and start configuration now.

R&S®MXO 4 Oscilloscope

R&S®MXO 5 Oscilloscope

Key facts Bandwidth: 4 channel: 350 MHz - 2 GHz | 8 channel: 100 MHz - 2 GHz World’s fastest oscilloscope with an update rate > 4.5 million waveforms per second Industry-leading system architecture: 18-bit vertical resolution/12-bit ADC Deepest in class standard memory: 500 Mpoints Industry leading simultaneous spectrum acquisition rate of 45,000 FFT/s and up to 4 spectra Next generation oscilloscope: evolved for more challenges The R&S®MXO 5 Series delivers breakthrough oscilloscope technology to speed up understanding and testing of electronic systems. The specifications for both the 4 and 8 channel models make the R&S®MXO 5 Series the industry leader in cutting-edge technology for swift and precise results. The oscilloscopes' advanced customized technology and revolutionary features are indispensable for insight into circuit behavior. The impressive 15.6" Full HD capacitive touchscreen and whisper-soft audible operating noise maximize R&S®MXO 5 Series performance and minimize power consumption.

R&S®FSV3000 Signal and spectrum analyzer

Key facts Frequency range from 10 Hz to 4, 7.5, 13.6, 30, 44, 50 GHz Analysis bandwidth up to 200 MHz SSB phase noise at 10 kHz offset (1 GHz): –114 dBc/Hz GUI with multi-touch, SCPI recorder and event based actions Options for analog and digital signal analysis, including 5G NR Fast and simple setup for fast access to measurement results The R&S®FSV3000 signal and spectrum analyzer performs measurements at the push of a button, uses event based actions for capture and makes script programming simple with a SCPI recorder – for quick setups of complex measurements. Fast measurement speeds for high throughput in production applications are another major advantage.

R&S®FE110ST Frontend

Key facts Fully calibrated solution Ease of operation Integrated to base units Smart accessories Compact form factor Frequency extension to 110 GHz The R&S®FE110ST extends the frequency of the R&S®SMW200A and R&S®SMM100A vector signal generators to the frequency range from 70 GHz to 110 GHz. After connection via LAN interface the frontend is fully integrated to the firmware of the base units. This ensures an easy-to use and calibrated solution which acts like one instrument. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

R&S®SMCV100B vector signal generator

Key facts Multi-standard platform for broadcast, navigation, cellular and wireless applications Full software option defined vector signal generator with 5" touchscreen Modern RF signal generation concept from 4 kHz up to 7.125 GHz High output power up to +25 dBm Modulation bandwidth up to 240 MHz Highest flexibility in applications and production The R&S®SMCV100B vector signal generator is the first multistandard platform for automotive, broadcast, navigation and wireless applications. This makes the R&S®SMCV100B unique for use in many applications, from the lab to production and wherever different technologies meet.

R&S®EPL1000 EMI test receiver

Key facts Preselection filters Time domain scan Tracking generator Battery operation Pulse protected input Quick, precise and compliant EMI measurements up to 30 MHz. The R&S®EPL1000 fully complies with CISPR16-1-1. The very fast time domain scan can check the complete CISPR bands A or B in a single shot. Built-in preselection ensures a high dynamic range and enables the acquisition of short pulses. The R&S®EPL1000 offers 4-channel click rate analysis, a spectrogram function, IF analysis and further functions for detailed analysis. Automation simplifies measurements and ensures exact reproducibility of test sequences. These and many more functions make the R&S®EPL1000 ideal for conducted voltage and current measurements. Typical applications include precompliance measurements, precertification and certification in line with IEC, EN, CISPR and FCC.